Jungle Bob 3D Aquarium Background 48x21 Inch For 55/75 Gallon Thin Beige 7797
The exact 3D Aquarium Background size is 46,4 x 19,4" in 2 sections - please compare it with your aquarium internal size.
There are foam stripes on the side edges of the background to fill the gap between the background and the glass.
This background WILL FIT TANK SIZE: Width: 48 Inches Height: 21 Inches
The thickness of this background is between 0,60 inches.The installation is very easy, you only have to slide it inside your aquarium.
No silicone required. You can have fish and other decorations during installation.
*PLEASE NOTE: Item which you will receive may not be identical to the main picture. Our backgrounds are hand made so each is unique! Slight variations in color , with some lighter/ darker may occur.
***Note- Measurements represent the back of the specified tank size(s). The background will be slightly shorter than the tank to allow it to fit within the support braces and plastic/glass trim around the tank edges, and allow it to stand up against the back. The difference in width is occupied by mesh to prevent fish from getting behind, and the height can be adjusted by leveling with gravel or small slate pieces. It can also be modified or trimmed using a dremmel or sander tool if needed.
Main features of our 3D Backgrounds:
- Our backgrounds sink,
- Are not flexible, you can't bend them, made from polyresin
- You can cut it / trim the background using a jigsaw, angled grinder, hacksaw.
- EASY to install - just slide inside your aquarium, no silicon required.
- Our backgrounds do not float.
- The rear can be used to hide heaters, filter pipes, air tube.
- You can also easily drill holes for your filter pipes inlet or outlets.
- Filter pipes can be hidden behind the background or underneath.
Check out our Jungle Bob Beige filter covers to hide any filter or heater media in your aquarium!